EnerBurn FAQs Part 2

EnerBurn FAQs Part 2

At JKG Fuel Solutions, we want to make sure you are equipped to get the most out of your EnerBurn, so here are the answers to even more of your frequently asked questions:

Gain Efficiencies with EnerBurn®

Q: Do I need to use a fuel lubricant additive?
A: No. EnerBurn is formulated with a fuel lubricant additive to extend the life of fuel injectors, fuel injector pumps, and other “upper cylinder” parts by reducing frictional forces that cause metal wear.

Q: Do I need to use a fuel stabilizer additive?
A: No. EnerBurn is formulated with a fuel stabilizer additive to prevent fouling of fuel injectors and fuel lines with solid fuel residues that otherwise will form at high temperatures and pressures.

Q: Should I treat stored bulk fuel with EnerBurn?
A: Yes. EnerBurn is formulated with a fuel stabilizer additive to prevent the chemical and microbial-induced degradation of diesel while it is being stored.

Q: Do I need to use a fuel anti-gelling additive in extreme cold weather?
A: Yes. EnerBurn does not contain an anti-gelling fuel additive. It is perfectly fine to mix EnerBurn with an anti-gel additive of your choice.

Q: Is EnerBurn a detergent?
A: No. EnerBurn is not a detergent-based additive nor does it contain dispersants or surfactants of any kind.

Q: Will EnerBurn harm my engine?
A: Absolutely not. EnerBurn will help your engine run more efficiently.  This is the key to preventing component failures and repair problems down the road.

Q: Will use of EnerBurn void my original engine manufacturer (OEM) engine warranty?
A: No. See our blog post on this topic for more information.

Q: Is EnerBurn safe for long-term use?
A: Yes. EnerBurn has been rigorously tested in over-the-road fleets over billions of road miles to determine its effectiveness and safety for long-term use in diesel engines.

Q: Do I need to have my DPF cleaned before using EnerBurn?
A: Yes. this is recommended, especially if you have driven more than 200,000 miles since the last DPF cleaning or if you cannot verify the last time the DPF was cleaned properly.

Q: How do I ensure that my DPF has been cleaned properly before using EnerBurn?
A: Refer to EnerBurn User Instructions or contact us for more information.

Q: My engine oil stays much cleaner using EnerBurn, does this mean I can change the oil less often?
A: Yes. This is another value-added benefit of EnerBurn.  Instead of having the oil changed, take a sample and get it analyzed.  If the oil analysis report comes back “all clear”, then you can extend the oil change interval accordingly.

  1. How do I order EnerBurn?
    A. To place your order directly, call 612-209-3079 or order online.

Would you like to know more about EnerBurn?®

Top