Category: Better Diesel FBC

Engine Test Results using Better Diesel FBC

Fuel economy test for Better Diesel™ FBC (Fuel Borne Catalyst)  

We have results from a controlled rolling dyno engine test using Better Diesel FBC…here are the results:

  • 12% reduced fuel consumption at 1400 rpm and 30% load
  • 14% reduced fuel consumption at 1400 rpm and 60% load

Test engine: This engine is a 2016 Cummins ISX CM2350 rated at 550 hp mounted in a Kenworth W900 “SuperCab”. The engine had 272,476 miles on the odometer when the fuel treatment period began in April.  The test concluded at the end of July with an odometer reading of 308,218 miles. The ECM program was “stock” as received from the engine dealer.

Test set-up: The engine testing was done using a Taylor rolling dynamometer at fixed rpm and load.  The stack exhaust emissions were sampled and analyzed using a PEMS (Portable Emissions Measurement System) manufactured by Sensors Inc using 40 CFR Part 1065 compliant methods for certifying engine fuel consumption. This EPA method for measuring fuel consumption eliminates any influence of extrinsic variables such as wind and rolling resistance, driving style, and terrain.

ECM report: The DPF regeneration performance was nothing short of outstanding with only 6 completed regens logged by the ECM over a period of 30,460 miles.  The fuel consumed per regeneration was 1.5 gallons.  The calculated regeneration interval was 5077 miles. These results were obtained with the combination of the Better Diesel™ FBC fuel treatment and the soot cyclone filter, “Dorothy” as manufactured by Pittsburgh Power.  Approximately one (1) ounce of soot was found accumulated in “the Dorothy” after each of two (2) oil changes at intervals of ~15,000 miles.  The engine oil analysis reports were normal.

Driver observations: As is typical with the use of Better Diesel™ FBC the driver noted smoother, quieter engine operation and better pulling power. The manually logged baseline MPG was 5.2. The driver noted that the MPG gradually increased over the first month of the evaluation period.  The driver-logged MPG from beginning to end of the 3-month test period was 5.85 MPG.  This represents an increase of 13% which included the initial clean-up and conditioning time.  The driver-logged MPG for the last 2 months of the test period was 5.94, an increase of 14%.  These results are consistent with the rolling dynamometer results obtained under stringently controlled engine operating conditions of rpm and load.

Better Diesel™ FBC is registered on the US EPA list of approved fuels and fuel additives under CFR 40 Part 79.

New Product Announcement- featured in Movin’ Out magazine, July 2018

Better Diesel FBC now featured in the July/Aug 2018 issue of Road King magazine and the July issue of Movin’ Out.

Use Better Diesel FBC (Fuel Borne Catalyst) for today’s ultra-low sulfur diesel fuels and high efficiency diesel engines. Better Diesel FBC directly enhances fuel combustion to increase fuel economy and drastically lower soot emissions. Reap the benefits that come from more efficient, cleaner combustion (more power, smoother, quieter engine operation, and fewer active regens) with additional protection for the fuel injectors. Read More

Would you like to know more about FBC additives for diesel fuel?®

Top